Filter
Top Products
34
USING THE SELF-CLEANING OVEN
Make sure the clock shows the correct time
of day.
Touch the
SELF CLEAN pad.
Using the
number pads, enter the
desired clean time.
Touch the
DELAY START pad.
The earliest start time you can set
will appear in the display.
Using the
number pads, enter the
time of day you want the clean
cycle to start.
Touch the
START pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature drops
below the lock temperature and the
LOCKED
DOOR
light goes off.
The oven shuts off automatically when the clean
cycle is complete.
When the
LOCKED DOOR light is off, the
door will unlock automatically.
• The words LOCK DOOR will flash and the
oven control will signal if you set the clean
cycle and forget to close the oven door.
• To stop a clean cycle, touch the CLEAR/OFF
pad. When the LOCKED DOOR light goes off
indicating the oven has cooled below the
locking temperature, open the door.
HOW TO DELAY THE START OF CLEANING
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with a
soap-filled scouring pad and rinse thor
oughly
with a vinegar and water mixture.
These deposits ar
e usually a salt r
esidue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• While the oven is self-cleaning, you can touch
the CLOCK pad to display the time of day.
To return to the clean countdown, touch the
COOK TIME pad.
• If the shelves become hard to slide, apply a
small amount of vegetable oil or cooking oil to
a paper towel and wipe the edges of the oven
shelves with the paper towel.
AFTER A CLEAN CYCLE
OPERATING INSTRUCTIONS
2
1
3
4
5
6
The oven door must be closed and all controls set correctly for the cycle to work properly.