Liebherr HC 1011/1060 HC 1001/1050 121113 7082698 - 00 Refrigerator User Manual


 
u
Keep the appliance closed until the Customer Service
engineer arrives.
w
The food will stay cool longer.
u
Disconnect the power plug (do not pull on the power
cord to do this) or switch off the fuse.
6.6 Appliance Information
Make a note of this information when the appliance is
installed:
Type Designation: _____________________
Service Number: _____________________
Appliance / Serial Number: _____________________
Date of purchase: _____________________
Where purchased: _____________________
7 Troubleshooting
Your appliance is designed and manufactured for reliable
operation and a long lifespan. If a malfunction nonethe-
less occurs during operation, please determine if the
malfunction is due to an operating error. If a service call
determines operator error, you will be charged for the
costs incurred, even during the warranty period. You may
be able to rectify the following problems yourself:
Problem Possible Cause Correction
The appliance
does not work.
The appliance is not switched on.
u
Switch on the appliance.
The power plug is not properly
inserted in the wall socket.
u
Check the power plug.
The fuse in the wall socket is not OK.
u
Check the fuse.
Power failure
u
Keep the appliance closed.
u
Protect the food: place dry ice on top of the food or
use an alternate freezer, if the power failure persists
for some time.
u
Do not re-freeze defrosted food.
The compressor
runs for a long
time.
When less refrigeration is required,
the speed-controlled compressor
switches to a low speed. Although
the running time is increased as a
result, energy is saved.
u
This is normal in energy-saving models.
SuperFrost function is activated.
u
The compressor runs long to rapidly freeze food.
This is normal.
SuperCool function is activated.
u
The compressor runs long to rapidly cool food. This
is normal.
A LED at the
lower rear of the
appliance (for
the compressor)
flashes regularly
every 15
seconds*.
The inverter is equipped wth a diag-
nostic LED.
u
The flashing is normal.
Noises are too
loud.
The different speed levels of speed-
controlled* compressors can cause
them to generate various noises
during operation.
u
These noises are normal.
A gurgling
sound
This sound comes from the refrig-
erant flowing in the refrigeration
circuit.
u
The sound is normal.
Troubleshooting
14 * Depending on model and options