Filter
Top Products
-
To reduce the risk of fire, electric shock, or personal
injury, installation work and electrical wiring must be
done by a qualified electrician in accordance with all
applicable codes and standards, including fire-rated
construction.
-
The Power Plug must be easily accessible so that the
appliance can be disconnected from the mains quickly
in an emergency. It must not be behind the back of the
appliance.
-
The top of the electric outlet must be located within
82-5/8 in. (2100 mm) from the top of the base in the
cabinet.
4.5 Switching on the appliance
Note
u
To switch on the entire appliance, only the freezer
compartment needs to be switched on.
Switch on the appliance 2 hours before loading
with frozen food for the first time.
Do not load frozen foods until the temperature
display reads 0 °F (-18 °C).
4.5.1 Switching on the freezer compartment
u
Open the door.
u
Press On/Off button, freezer compartment
Fig. 2 (3)
.
w
The refrigerator compartment temperature display indi-
cates the set temperature.
w
The temperature display for the freezer compartment
will flash until the temperature is cold enough. If the
temperature is greater than 32 °F (0 °C), flashing
dashes will appear; if the temperature is lower than this,
the set temperature will flash on the display.
4.5.2 Switching on the fridge compartment
u
Open the door.
u
Press Fridge compartment On/Off button
Fig. 2 (11)
.
w
The interior light comes on when the door is opened.
w
The temperature display flashes. The fridge compart-
ment is switched on.
5 Operation
5.1 Temperature display unit
The temperature display can be changed from °F to °C.
5.1.1 To change the unit
u
Activate setting mode: Press SuperFrost button
Fig. 2 (2)
for about 5 seconds.
w
The SuperFrost button
Fig. 2 (2)
will flash.
w
c is displayed in the temperature display.
u
Using Freezer compartment Up button
Fig. 2 (5)
/ Freezer compartment Down button
Fig. 2 (4)
select °.
u
To confirm: Briefly press SuperFrost button
Fig. 2 (2)
.
u
Using Freezer compartment Up button
Fig. 2 (5)
/ Freezer compartment Down button
Fig. 2 (4)
select °F or °C.
u
To confirm: Briefly press SuperFrost button
Fig. 2 (2)
.
u
To exit setting mode: Press Freezer compartment
On/Off button
Fig. 2 (3)
.
-or-
u
Wait 5 minutes.
w
The temperature is again displayed in the temperature
display.
5.2 Brightness of the temperature
display
You can adapt the brightness of the temperature display
to the light conditions in the room in which it is installed.
5.2.1 Setting the brightness
The brightness can be set between h1 (minimum lumi-
nosity) and h5 (maximum luminosity).
u
To activate setting mode: Press SuperFrost button
Fig. 2 (2)
for about 5 seconds.
w
c is shown on the display.
w
The SuperFrost button will flash.
u
Press Freezer compartment Up button
Fig. 2 (5)
or
Freezer compartment Down button
Fig. 2 (4)
to select h.
u
To confirm: Briefly press SuperFrost button
Fig. 2 (2)
.
u
To set the display brighter: Press Freezer
compartment Up button
Fig. 2 (5)
.
u
To set the display darker: Press Freezer
compartment Down button
Fig. 2 (4)
.
u
To confirm: Press SuperFrost button
Fig. 2 (2)
.
w
The brightness is set to the new value.
u
To deactivate setting mode: Press Freezer compart-
ment On/Off button
Fig. 2 (3)
.
-or-
u
Wait 5 minutes.
w
The temperature is again displayed in the temperature
display.
5.3 Child-proof lock
You can use the child-proof lock to lock the
buttons. This means that children cannot acci-
dentally switch off the appliance when playing.
5.3.1 Switching on the child-proof lock
u
To activate setting mode: Press SuperFrost button
Fig. 2 (2)
for about 5 seconds.
w
c is shown on the display.
w
The SuperFrost button will flash.
Operation
* Depending on model and options 7