Filter
Top Products
FIG. 7.6 MODULAR SUPPORT BAR
FIG. 7.7 ADJUSTABLE LEG
ITEM
1
2
3
4
5
6
7
8
QTY.
1
1
1
1
1
1
1
1
PART NO.
98-1434
98-1498
98-1431
98-1432
98-1524
98-1525
98-1469
98-1468
DESCRIPTION
ASSY., MODULAR PANEL, LEFT SIDE
WELD ASSY., COVER, LEFT SIDE
ASSY., MODULAR PANEL, FRONT, 30 GALLON
ASSY., MODULAR PANEL, FRONT, 40 GALLON
PANEL, REAR MODULAR, 30 GALLON
PANEL, REAR MODULAR, 40 GALLON
COVER, MODULAR FRAME, FRONT HORIZONTAL, 30 GAL.
COVER, MODULAR FRAME, FRONT HORIZONTAL, 40 GAL.
MODULAR OPTIONS
ITEM
1
2
3
4
QTY.
1
1
2
2
PART NO.
98-1435
98-1436
08-7836
98-1521
DESCRIPTION
MODULAR SUPPORT BAR, 30 GALLON
MODULAR SUPPORT BAR, 40 GALLON
WASHER, S.S. 1.63" OD X 0.56 ID
LEG, ADJUSTABLE, 1.63" OD, S.S.
TABLE FOR FIG. 7.6
MODULAR INSTRUCTIONS:
1. After receiving Universe Skillet and uncrating unit, make sure all components needed for modularity have been shipped
with the unit. (See below for needed components for 30 -Gal or 40-Gal unit)
2. Position Modular Support Bar (Item 1, 30-Gal , Item 2, 40-Gal) by locating holes on Support Bar in line with mounting
holes on the bottom of front legs. Secure in place by screwing adjustable legs (Item 4) and Washer (Item 3) into holes on
bottom of front legs. Tighten securely. (See Fig 7.6)
3. Mount Flanged Adjustable Feet (Item 1) and Washer (Item 2) on bottom of rear legs. Tighten securely. (See Fig 7.7)
4. Mount Modular Panel Assembly, Left Side (Item 1) by pushing panel
into mounting holes located on left side vertical frame supports. Ball
plungers should line up with mounting holes, and allow easy on/off
access. (See Fig 7.8)
5. Mount Modular Panel Assembly, Front (Item 3 (30-Gal), Item 4 (40-
Gal)) by pushing panel into mounting holes located on front vertical
frame supports. Ball plungers should line up with mounting holes, and
allow easy on/off access. (See Fig 7.8)
OPTIONAL: MODULAR LINE ACCESORIES
SECTION 7 OPTIONS PARTS LIST
7-7