Filter
Top Products
13
Quick Start Guide Cisco Aironet 1130AG Access Point
Installation Summary
Installing the access point involves these operations:
• Mounting the access point
• Connecting power
• Obtaining an IP address
• Configuring power
• Configuring basic settings
• Configuring security settings
Before you install the access point, make sure that you are using a computer
connected to the same network as the access point, and obtain the following
information from your network system administrator:
• A system name
• The case-sensitive wireless service set identifier (SSID) for your radio
network
• A SimpleNetwork Management Protocol (SNMP)community name and
the SNMP file attribute (if SNMP is in use)