Filter
Top Products
40
78-15955-02
Checking the Access Point LEDs
If your access point is not working properly, check the Status LED on the top
panel or the Ethernet and Radio LEDs in the cable bay area. You can use the
LED colors to assess the unit status.
Note To see the Ethernet and Radio LEDs you must open the access
point cover. (Refer to the “How to Open the Top Cover” section
on page 2.)
The LED meanings are in this table.
Top of Unit Cable Bay Area
Meaning
Status LED Ethernet LED Radio LED
Blue — — Normal operating condition;
at least one wireless device
associated.
Light green — — Normal operating condition;
no wireless device associated.
— Blinking
green
— Transmitting or receiving
Ethernet packets.