Filter
Top Products
31
Quick Start Guide Cisco Aironet 1130AG Access Point
Aironet Extensions
By default, the access point uses Cisco Aironet 802.11 extensions to
detect the capabilities of Cisco Aironet client devices and to support
features that require specific interaction between the access point and
associated client devices. Aironet extensions must be enabled to support
features such as load balancing, Message Integrity Check (MIC),
Temporal Key Integrity Check (TKIP), Repeater Mode, and World
Mode.
Disabling Aironet Extensionsdisables the featuresmentioned above,but
it sometimes improves the ability of non-Cisco client devices to
associate to the access point.
Configuring Security Settings
After you assign basic settings to your access point, you must configure
security settings to prevent unauthorized access to your network. Because it
is a radio device, the access point can communicate beyond the physical
boundaries of your work site.
Just as you use the Express Setup page to assign basic settings, you can use
the Express Security page to create unique SSIDs and assign one of four
security types to them. This illustration shows the Express Security page.