Filter
Top Products
Fitting the stainless steel hose
to the appliance
When fitting the stainless steel hose,
make sure that it is neither kinked
nor damaged.
^ Remove cap (1) from the water
connection at the front of the
appliance.
^ Screw coupling nut (2) on stainless
steel hose (3) onto the threaded
union.
^
Ensure that all connections are
watertight.
^
Turn on the stopcock slowly and
check the whole water system for
leaks.
^
The appliance can then be
connected to the electricity supply
(see "Electrical connection").
After a maximum of 10 hours the first
ice cubes will drop out of the ice
cube maker and collect in the
container.
Mains water connection
54