Filter
Top Products
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Frequently asked questions").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle.
This would shift the brew unit and it
would not fit back into the coffee
system.
^
Clean the brew unit by hand under
running hot water. Do not use soap.
^
Rub any coffee residue from the
filters. One filter is located inside the
funnel, the other to the left of the
funnel.
^
Dry the funnel to prevent ground
coffee from sticking to it the next time
coffee is prepared.
^
Clean the inside of the coffee system.
Use your vacuum cleaner to remove
dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^
Push the brew unit back into the
coffee system, making sure it is
straight.
^ Push the button on the bottom of the
brew unit handle a while turning the
handle to the right b.
^ Close the door.
Cleaning and care
59