Filter
Top Products
^
Slide the hoses back onto the angled
section and reinsert it.
^
Reinsert the air intake hose into the
opening c.
Step 3: Cleaning the milk valve
and the milk pipework in the
main dispenser
^ Touch "Main menu" or the "Back"
sensor.
^ Touch "Maintenance" y.
^
Touch "Clean the main dispenser".
The main dispenser and the milk valve
will move into the maintenance position.
Important! Before you confirm
"Leave maintenance position" with
"OK", you must remove the cleaning
brush. Otherwise, the coffee system
will be damaged.
^
Insert the brush into the milk valve.
Move the brush back and forth.
^
Remove and disassemble the
dispensing unit as described in
"Cleaning and care – Main
dispenser".
^ Rinse all parts carefully under
running water.
Use the cleaning brush to clean all
parts carefully. Do not use a needle
or suchlike in order to avoid piercing
the silicone parts.
^
Reassemble the dispensing unit and
reinsert it into the main dispenser.
^
Replace the cover.
^
Touch "OK".
The milk valve will move into the stan
-
dard position and the milk pipework is
rinsed.
Cleaning clogged milk pipework
76