Filter
Top Products
Installing the stainless steel
tubing in the unit
^ Remove the water connection cover
at the lower rear side of the coffee
machine.
^ Take the angled side of the stainless
steel tube and check whether the
sealing ring is in place. If necessary,
insert it.
^ Place the union nut of the stainless
steel tube onto the screw thread.
^ Make sure the fittings are tight.
Connection to the water
supply
Disconnect the machine from the
electrical supply before connecting
it to the water supply.
^ Remove the water connection cover
at the lower rear side of the coffee
machine.
^ Check whether the sealing ring is in
place. If necessary, insert it.
^ Screw the supplied brass
compression fitting, with the ¾" end,
tightly onto the water connector of the
coffee machine. (Tighten the
compression fitting by hand, do not
use a tool.) The fitting includes an
opening for standard ¼" piping.
^ Connect the compression fitting to
the water supply.
^ Slowly open the shut-off valve to the
water supply and check for leaks.
If necessary, check whether the
sealing ring and fittings are tight.
You can now continue with the
installation of the unit (see "Installation").
Plumbing
81