Filter
Top Products
Cleaning and care
24
Changing a halogen lamp
The halogen lamps should be replaced
with the following:
Manufacturer................................ EGLO
Lamp type
.................................... GU10
Specification................................ 11427
Wattage........................................... 3 W
These halogen lamps are available from
Miel
e or from specialist retailers.
P
ull out the deflector plate, and
remove the grease filter as described
earlier.
Switch off the fan and the lighting.
Note that halogen lamps become
ver
y hot when in use.
They can cause burns even after
being switched off for some time!
Allow the lamps to cool down for a
few minut
es before changing them.
Remo
ve the charcoal filter if the
cooker hood is being used in
recirculation mode.
Disconnect the cooker hood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
P
ush down the lighting unit slightly
via the opening in the safety panel.
T
urn the halogen lamp anti-clockwise
and pull it out.
Scr
ew the new halogen lamp into the
socket and push it upwards. Please
follow the manufacturer's safety
instructions.
Replace
the grease filter and, if being
used in recirculation mode, the
charcoal filter.