Filter
Top Products
Installation
34
Secur
e the cooker hood to the
brackets from below using two
screws on each side.
P
ull out the deflector plate and
remove the protective film between
the deflector plate and the casing.
Secur
e the cooker hood to the floor
of the housing unit from below using
4 screws (6 screws are required for a
90 cm wide cooker hood).
To avoid damaging the deflector
plate when it is pulled out, care
should be taken to screw the fixing
screws in straight and to ensure that
the screwheads are countersunk.
Secur
e the spacer strip to the back of
the appliance from behind using 4
plastic rivets as shown.