Filter
Top Products
Installation
35
Attaching the front panel
The front of the deflector plate can be
fitt
ed with a front panel to match
existing kitchen furniture units.
The front panel must not exceed
1300 g. This applies to front panels with
a depth of up to 30 mm. For larger and
heavier front panels, the weight must
be reduced by e.g. machining it away at
the back.
A DML 400 installation kit, available as
an optional accessory, is required for
this.
F
ollow the installation instructions
supplied.
Aligning the deflector plate
The position of the deflector plate can
be b
rought forward by up to 35 mm
using the adjusting screws on either
side of the deflector plate. This allows
the deflector plate to be aligned to the
front of the kitchen furniture units on
either side.
Use a scr
ewdriver to align the
deflector plate correctly.