Filter
Top Products
Installation
37
A
ttach the exhaust ducting to the
exhaust socket on the cooker hood.
See "Conn
ection for air extraction"
for further instructions on fitting the
ducting.
Setting up for recirculation
mode
If site conditions are not suitable for the
c
ooker hood to be used with air
extraction, the appliance must be set
up for recirculation. Conversion kit DUU
151, available through your dealer of
from Miele, is required for operating the
cooker hood in recirculation mode. You
will also need a charcoal filter (see
"Technical data").
Fit the conversion kit as described in
the installation instructions supplied
with the kit. Mak
e sure that the slats
in the exhaust grille point towards the
centre of the room and not towards a