Filter
Top Products
Operation (Automatic and Manual modes)
24
Checking the filter saturation
ind
icator
Before the set operating time has run
out, you can
check what percentage of
the time has elapsed.
P
ress the On/Off button to turn the
fan on.
P
ress and hold the operating hours
button :
The grease filter symbol lights up.
One or more of the fan power level
indicat
ors will flash simultaneously.
The number of flashing indicators
shows the elapsed oper
ating hours as a
percentage.
Indicator 1
..................................... 25%
Indicators 1 and 2
......................... 50%
Indicators 1 t
o 3 ............................ 75%
Indicators 1 to IS ......................... 100%
The elapsed operating hours remain
st
ored in the memory when the hood
is turned off or if power to the
appliance is lost.
Adjusting the height of the
canopy
The height adjustment feature on the
c
anopy can be used to:
– adapt the height of the hood to suit
the installation conditions.
– adjust the working area underneath
the ho
od to the height of the user.
– maximize steam extraction by
lo
wering the steam during particularly
intensive cooking.
– create more working space above
the cooktop by raising the canopy
when required.
The
canopy can be raised or lowered
by pressing the controls briefly.
P
ressing one of the controls again
stops the canopy.
If it is not stopped, the canopy will
aut
omatically be raised or lowered to its
fullest extent.
Repeated use of the height
adjustmen
t feature over several
minutes will cause it to cut out.
It can be used again after a pause.