Filter
Top Products
Cleaning and care
28
After cleaning
Aft
er cleaning, leave the filters on an
absorbent surface to dry.
When r
emoving the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
Rein
stall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
If the filt
ers have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
Resetting the filter saturation
count
er for the grease filters
Once cleaning is complete, the filter
satur
ation counter must be reset.
While
the fan is turned on, press the
filter saturation indicator for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol goes out.
When cleaning the grease filters before
the full oper
ating time has elapsed:
P
ress the filter saturation indicator
for approx. 6 seconds until 1 is
the only indicator flashing.