Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
7
Do not use a power bar or e
xtension cord to connect the
ventilation hood to electricity. These are a fire hazard and do not
guarantee the required level of appliance safety.
T
o ensure safe operation, only use the ventilation hood after it has
been properly installed.
This venti
lation hood may not be used in non-stationary locations
(e.g. on a ship).
Adeq
uate ventilation must be provided when the hood is operated
simultaneously with devices that burn gas or other fuels.
Only open the housing as described in the enclosed "Installation
diagr
am" and in the "Cleaning and care" section of this manual.
Under no circumstances should any other parts of the housing be
opened.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operation faults.
Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
During installation, maintenance, and repair work, the ventilation
hood must be disconnected from the electrical supply. It is only
completely isolated from the electricity supply if one of the following
applies:
– The circuit breakers on the electrical service panel are tripped.
– The screw-type fuses on the electrical service panel have been
r
emoved.
– The power cable (if present) has been unplugged from the socket
(pull the plug no
t the cord).