Filter
Top Products
Activating Con@ctivity 2.0
46
Activating the cooktop
While the ventilation hood is
sear
ching for a wireless connection,
start activation on the cooktop.
More information can be found in the
operating instructions for the
cooktop.
When the co
oktop registers that
connection has been established,
confirm activation on the ventilation
hood with the delayed shut-down
button 515. All indicators will go
out.
Co
nfirm activation on the cooktop.
The Con@ctivity 2.0 function is now
r
eady for use.
If you do not confirm within 4 minutes,
activation will be canceled.
You only need to carry out the
activati
on procedure once. If the
appliances are disconnected from the
electricity supply, for example during
a loss of power, they will still remain
activated.
Activation failed
If a wir
eless connection cannot be
established despite activation of the
Con@ctivity function on the
ventilation hood and cooktop, the
function must first be deactivated
and then reactivated on both
appliances.
Deactivating Con@ctivity 2.0
Deactivation on the hood is carried
out in the same way as activation, by
selecting ""
instead of "."
T
o deactivate the burner, please refer
to the corresponding operating
instructions.
Please keep in mind that disabling the
connection will also disable any
r
emote control function being used.
The remote control must then be
reactivated.