Filter
Top Products
Allow the coffee system to cool
before cleaning. The water in the
drip tray can be very hot.
May cause burns!
Do not clean the unit with a steam
cleaner.
Never use cleaners containing
chlorides, sand, soda or scouring
agents. These will damage the
surface.
Rinsing the system
It is important to rinse the system daily
to remove any coffee residues from the
coffee system. The hot water from the
rinsing process also pre-warms the
pipework..
It is also important to rinse the system
at the end of each day.
Turning the automatic rinsing On /
Off
The pipework is rinsed automatically
when the coffee system is turned off if
this function is turned on, or when the
coffee system has prepared at least
one drink since it was turned on.
The machine comes with this function
turned on.
TIP It is recommended to keep this
function turned on so that you do not
forget to rinse the system.
^
In the main menu, press and hold OK
for two seconds.
SETTINGS
< AUTOMATIC RINSING >
^ Turn the rotary selector until AUTO-
MATIC RINSING appears in the
display. Confirm with OK.
^ Turn the rotary selector to YES or NO
(as desired). Confirm with OK.
The setting is now saved.
Cleaning and care
45