Filter
Top Products
^
Clean all the parts with a mild
solution of warm water and liquid
dish soap. If necessary a small soft
brush can be used to remove
stubborn soiling.
^
Rinse all parts carefully and
completely with water.
^
Dry parts with a soft cloth.
Reassemble the cappuccinatore in the
reverse order:
^
First replace the locking disc,
followed by the dial on the
cappuccinatore.
^ Then replace the milk tube and
nozzles.
^ Fit the cappuccinatore on to the
steam and water spout from below.
Milk flask
The milk flask should be taken apart
and cleaned daily.
The milk flask is not dishwasher safe,
wash by hand.
^
Pull the milk tube from the
cappuccinatore. Disconnect the
other end of the milk tube/stainless
steel angle from the lid.
^
Unscrew the lid and remove the
stainless steel intake pipe on the lid.
^
Wash all parts with a mild solution of
warm water and liquid dish soap. If
necessary use a small brush to
remove stubborn milk residue.
^
Rinse all parts with water.
^
Thoroughly dry all parts.
^
Put the milk container back together.
Water tank
The water should be changed everyday
to prevent the build-up of bacteria.
Be sure that the valve, bottom of the
water tank and the area under the
water tank are clean and free of
obstructions. Otherwise the water
tank will not sit correctly.
^
Wash the water container in the
dishwasher, or by hand using a mild
solution of warm water and liquid
dish soap.
^ Dry with a soft cloth.
^ Clean the water tank niche, in
particular the slots.
Cleaning and care
48