Filter
Top Products
Technical Information
G600 & G800 Electronic Dishwashers
4.12 WaterProof System (WPS)
The Water Inlet Valve (Y2) consists of two (2) electro-mechanical
valves mounted within a waterproof box located at the water
connection (end of the water intake hose).
The valves are mounted in physically and electrically in series to
ensure that if one valve should fail (e.g. due to blockage caused by a
foreign body) the water flow will still be switched off by the other valve.
Figure 4-6: WaterProof System Connection
The water inlet system is protected by WPS (WaterProof System)
which uses an outer sleeve protecting the water inlet hose and valves.
In the event a valve or the hose should leak, the leaking water will flow
along the outer sleeve to the drip tray in the bottom of the unit. When a
quantity of water collects in the drip tray, the Float Switch (B8/3) is
actuated.
33