Non-rewireable plugs BS 1363
If this appliance is fitted with a
non-rewireable plug, the following
information applies: if the socket outlets
are not suitable for the plug supplied
with this product, it must be cut off and
an appropriate plug fitted. The fuse
carrier and fuse should be removed
from the old plug and disposed of. The
old plug should then be disposed of
and on no account be inserted into any
socket elsewhere in the house (electric
shock hazard).
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug, (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Electrical connection IRL, U.K., ZA
56