Filter
Top Products
To clean at high temperatures
Before cleaning the catalytic panels
using high temperatures, make sure
that all PerfectClean surfaces have
been cleaned as previously
described. Otherwise, the high
temperatures can cause deposits to
become baked on to the
PerfectClean surfaces and become
impossible to remove.
If, after manual cleaning, the oven is
still heavily soiled, heating it to a high
temperature will help remove further
soiling caused by oil and grease
splashes from the catalytic surfaces.
Note that deposits of spices, syrups
and similar substances are not
removed by this process. These should
be removed while fresh by hand with a
mild solution of hot water and
washing-up liquid applied with a soft
brush.
^
Take all accessories out of the oven.
^
Turn the oven selector to Fan plus
Y.
^
Turn the temperature selector to the
highest setting.
^
Run the oven for approx. 1 hour. The
length of time will depend on the
level of soiling.
On ovens with a clock/timer it is a good
idea to set the finish time for the
process using the timer. This way you
will not forget to switch the oven off at
the end.
Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.
Should the catalytic enamelling on
the back panel, side panels or the
roof liner become ineffective through
improper use or heavy soiling, a
replacement can be obtained from
your Miele dealer or the Miele Spare
Parts dept.
Cleaning and care
53