Miele H 4230 Oven User Manual


 
Features
Oven controls
In addition to operating the various
cooking programmes to bake, roast
and grill, the electronic controls on
models with a clock/timer also offer the
following features:
Clock display
Minute minder
Timer to automatically switch cooking
programmes off, or on and off
Settings can be customised
Cooling system
As soon as the oven is switched on, a
cooling fan is automatically engaged.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
PerfectClean treated surfaces
The following surfaces are all treated
with PerfectClean enamelling:
Oven interior
Runners
Baking tray
Grill pan
Rack
PerfectClean enamelled surfaces have
very good anti-stick properties and are
much easier to keep clean than
conventional enamel, if cleaned
regularly.
See "Cleaning and care" for more
information.
Catalytic enamelled surfaces
The back panel, roof liner and side
liners (if fitted) are coated with dark
grey catalytic enamel. Soiling from oil
and fat is burnt off these surfaces when
very high temperatures are used in the
oven.
This makes it easier to keep
inaccessible areas of the oven clean.
See "Cleaning and care" for more
information.
Retractable controls
Depending on model, the controls are
retractable at the 0 position.
Press them to release or retract them.
Do not push them in from any other
position as this would break them.
Description of the appliance
8