Filter
Top Products
When you select a function, its symbol
will flash in the display, e.g. l, T, S
or ß.
You can only enter a time/duration
while the symbol is flashing (15
seconds approx.).
If you fail to make an entry during
these 15 seconds, you will have to
call up the symbol in the display
again using the OK sensor.
Each press of the ? or ; sensor alters
the time in one minute increments.
Holding one of these sensors in will
speed up the process.
To save your entry, touch the OK
sensor or wait for approx. 15 seconds.
After this time, your entry will be saved
automatically and the symbol will light
up.
The time shown in the display
If a minute minder time has been
entered, this will generally take
precedence in the display.
If a duration T and/or finish time S
have been entered, the time of day will
take precedence in the display. The T
and S symbols indicate which of these
has been entered. The duration and/or
finish time can be called up by
touching the OK sensor.
Changing the time of day
The clock/timer has a 24 hour display.
The time of day can only be altered
if no cooking time (duration T
and/or finish time S) has been
entered.
^
Touch the ? and ; sensors at the
same time.
^
Enter the time of day using the ? or
; sensors whilst the dot ß is flashing
in the display.
^ Touch the OK sensor.
The entry is saved and the dot ß now
lights up continuously.
If there is a power cut, the time of day
will need to be re-entered.
Clock/Timer
21