Filter
Top Products
^
First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
^ Attach panel b to soft-close
mechanism bracket d.
^
Push cover e on from the side so
that the openings for the pin f are
vertically aligned.
^
Align bracket d to the hinge plate,
and insert pin f from above so that
the right angle fits into the recess.
^
Clip cover e into position.
Make sure that cover e fits properly so
that the door can be closed without
hindrance and the pin is protected.
^
Remove retaining clip g.
^ Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Close the upper door.
Changing the door hinging
75