Filter
Top Products
^
Push hinge pin e up and out from
underneath.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
^
Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door, and undo
screws g on the soft-close
mechanism.
^
Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^
Then place it to one side.
Removing the lower door
^
Close the lower door.
^
Pull the middle hinge pin i upwards
to remove it.
^ Carefully lift the lower door off and
place it to one side.
^ Pull cover j off.
^ Unscrew hinge plate k, rotate it by
180° and fit it on the opposite side.
^ Turn plastic cover h 180° and refit it
in the centre of hinge plate k.
^
Refit cover j on the opposite side.
Changing the door hinging
70