Filter
Top Products
^ Remove cap l from the bearing
bush in the door and refit on the
opposite side.
Refitting the lower door
^
Unscrew threaded pin d by one turn
using the allen key supplied.
^
Pull hinge pin a together with disc b
and adjustable foot c upwards and
off.
^
Remove cover cap e.
^
Undo screws f and take hinge plate
g off.
^
Unscrew part i from hinge plate g,
rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.
^
Refit cover cap e in the other hole.
^
Unscrew threaded pin d fully using
the allen key supplied.
^
Unscrew the threaded pin d on the
opposite side of the hinge plate, until
it is flush with the outside of the hinge
plate.
The end must protrude into the hole
for the hinge bolt, so that the guide
on the hinge bolt can be correctly
located later (see following diagram).
^ Remove cover h and fit it into the
holes on the opposite side.
Changing the door hinging
71