Filter
Top Products
Refitting the upper door
^
Then fit the upper door on middle
hinge pin i.
^
Close the upper door.
^ Fit hinge plate n onto the opposite
side and secure it with screws m.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
^ Refit cover k on the opposite side.
^ Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.
Replacing the upper soft-close door
mechanism
^
Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^
Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^
Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.
Changing the door hinging
74