Filter
Top Products
Setting the temperature
The temperatures for the refrigerator
section and the freezer section are set
separately.
^
Select the refrigerator or the freezer
section.
The Refrigerator or Freezer symbol
lights up yellow.
^ Set the temperature with the buttons
beside the display.
Tap the
X button: to decrease the temperature
Y button: to increase the temperature.
The temperature being set will flash in
the display.
When you tap the buttons, you will see
the following changes in the
temperature display:
–
When first tapped: The last
temperature selected flashes.
–
Each subsequent tapping:
adjusts the temperature in
increments of 1°F / 1°C.
–
Holding down the button will adjust
the temperature continuously.
When the highest / lowest
temperature is reached the X / Y
button disappears.
Approximately 5 seconds after you
release the button, the actual average
temperature in the refrigerator or
freezer section will automatically be
displayed.
If you have adjusted the temperature,
wait approx. 6 hours if the appliance is
not very full or approx. 24 hours if it is
full before checking the temperature
display again. It will take that long to
reach the selected temperature. If, after
this amount of time, the temperature is
too high or too low, you will need to
adjust it again.
Temperature ranges
The temperature can be selected within
the following ranges:
–
In the refrigerator section, from 36 to
44°F (2°C to 7°C).
–
In the freezer section, 6 to -15°F
(-14° to -26°C).
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the coldest temperature. If the
ambient temperature is too high, it may
not be possible for the appliance to
reach the lowest temperature.
The correct temperature
20