Filter
Top Products
Never use abrasive cleaners on the
appliance, or products that contain
washing soda, acids, chlorine
bleach or chemical solvents.
Note that so-called non-abrasive
cleaners are also unsuitable as they
can cause dull patches.
For all stainless steel surfaces, use a
suitable stainless steel cleaner
(available through Miele Customer
Service).
Make sure that no water gets into
the electronics or into the lighting.
Do not let any cleaning water get
into the condensate drain hole.
Do not use a steam cleaner to clean
the appliance. Steam could reach
the electrical components and
cause a short circuit.
Never remove the data plate inside
the appliance. It contains important
information that is required in the
event of a service call.
Before cleaning
^
Switch the appliance off, then unplug
it from the socket.
^
Take any food out of the appliance
and store it in a cool place.
^
Take out any removable parts so that
they can be cleaned.
^
To clean the serving shelves in the
door, remove the hanging containers
from the stainless steel frames.
Cleaning the outside walls, the
interior and accessories
Use lukewarm water with some mild
dish liquid. The parts should all be
cleaned by hand.
^
Clean the appliance at least once a
month.
^
Clean the condensate channel and
drain hole more frequently using a
cotton swab, for instance, so that
condensate can drain away
unobstructed.
^
After washing, wipe the outside walls,
the interior and accessories with
clear water, then dry with a soft cloth.
Leave the appliance doors open for a
short while.
^ Use a special product to clean the
stainless steel surfaces.
^ After each cleaning, wipe the
stainless steel surfaces with a
product designed for the care of
stainless steel!
It is important that the stainless steel
surfaces are sealed with a product
suitable for stainless steel after each
cleaning. This protects the stainless
steel surface and prevents the
surface from becoming soiled too
quickly.
Cleaning and care
39