Filter
Top Products
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18°C.
This sensor is used to switch between
the refrigerator and freezer sections.
If you want to select the freezer section
(to check the temperature, for
example),
^
touch the sensor for selecting the
freezer/refrigerator section until the
"Freezer" symbol lights up yellow.
Depending on which section you have
selected, you can
–
select either Super cool or Super
freeze, or
–
adjust the temperature.
Please refer to the relevant section for
more information.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.
Switching off
^
Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the safety lock is still
activated).
The refrigerator section/PerfectFresh
zone and freezer section will switch off
one after the other.
The interior lighting will not come on
when you open the door and the
cooling process will be switched off.
To switch the refrigerator
section/PerfectFresh zone or freezer
section on or off separately
The refrigerator section/PerfectFresh
zone and the freezer section can be
switched on or off separately, if you
should only wish to use one section.
This is useful, e.g. whilst on holiday, if
you only want to leave the freezer
section switched on:
Before using for the first time
15