Filter
Top Products
^
Attach panel b to soft-close
mechanism bracket d.
^
Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is protected.
^ Remove retaining clip g.
^
Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^
Close the lower door.
Refitting the upper door
^
Then fit the upper door on middle
hinge pin i.
^
Close the upper door.
^ Fit hinge plate n onto the opposite
side and secure it with screws m.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
^ Refit cover k on the opposite side.
^ Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.
Changing the door hinging
69