Filter
Top Products
Cleaning the ice cube tray
Ice cubes freeze in the ice cube tray
and then drop into the ice cube drawer
below.
Clean the ice cube tray regularly with
warm water and a little washing-up
liquid to remove residual ice and water.
The ice cube tray cannot be removed
and must be cleaned in situ.
You should also clean the ice cube
maker before switching off the
appliance for a long time (e.g. when
going on holiday).
^ Switch the appliance on.
^
Pull out the ice cube drawer a little
way.
^
Press the On/Off button a on the ice
cube maker. The indicator light will
come on.
^
Empty the ice cube drawer.
^
Press the on/off button on the ice
cube maker for at least 12 seconds.
The indicator light flashes slowly at first
then quickly.
^
Push the ice cube drawer in as far as
it will go within the next 60 seconds.
You will hear the ice cube tray turn so
that it is at an angle.
^
Wait until the ice cube tray has
completed this rotation before
continuing.
^
Then take the ice cube drawer out of
the appliance and clean it.
^ Clean the ice cube tray b in the ice
cube maker.
After cleaning
^ Press the On/Off button on the ice
cube maker.
^
Push the drawer all the way back into
the appliance.
You will hear the ice cube tray turn
back into position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
Discard the first three batches of ice
cubes after cleaning. They may contain
traces of washing-up liquid and are
unsuitable for consumption.
Cleaning and care
46