Filter
Top Products
^
Push hinge pin e up and out from
underneath.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
^
Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door.
^
Undo screw g on the soft-close
mechanism and the spacer.
^
Using a flat-bladed screwdriver push
the centre of the soft-close
mechanism towards the middle of the
door.
^
Then prise the soft-close mechanism
out of the hinge side of the door.
^
Then place it to one side.
^
Push the spacer out towards the
hinge side.
^
Then place the spacer to one side.
Removing the lower door
^
Close the lower door.
^ Pull the middle hinge pin i upwards
to remove it.
^ Carefully lift the lower door off and
place it to one side.
^ Pull cover j off.
^ Unscrew hinge plate k, rotate it by
180° and fit it on the opposite side.
^
Turn plastic cover h 180° and refit it
in the centre of hinge plate k.
^
Refit cover j on the opposite side.
Changing the door hinging
66