Miele KFN 14947 SDE ed/cs Refrigerator User Manual


 
If you have delayed changing the
active charcoal filters and the indicator
is not lit up, you will need to reset the
counter when you replace the active
charcoal filters via the settings mode.
^
Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until
^ appears in the display.
^
Touch the On/Off sensor.
^
Touch the X sensor repeatedly until
^2appears in the display.
^
Touch the On/Off sensor for approx.
2 seconds to confirm.
The counter is now reset.
^
Touch the X sensor repeatedly until
c appears in the display.
^
Touch the On/Off sensor.
You have now left the settings mode.
Useful tip:
When you are storing foods with a
strong smell (such as ripe cheeses),
place the holder containing the
active charcoal filters on the shelf
where the food is going to be stored,
change the active charcoal filters
early if required (remembering to
reset the counter),
and place more active charcoal
filters (in holders) in the appliance.
Active charcoal filters and holders
can be obtained from your Miele
dealer or from the Miele Spare Parts
Department.
Active charcoal filters
49