Filter
Top Products
Ventilation
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the air inlet and outlet must not be
covered or blocked in any way. They
should be dusted on a regular basis.
Installation
^
Remove the cable clip from the back
of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position with the back against the
wall.
Aligning the appliance
^
To align the appliance, adjust the
front feet using the spanner supplied.
Levelling the appliance door
^
Ensure that you unscrew adjusting
foot a from the hinge plate until it sits
on the floor. Then unscrew the foot by
a further 90°.
Installation
60