Filter
Top Products
The alarm sounds.
Possible fault Solution
The appliance door(s) have been
open for longer than 60 seconds.
Close the door(s).
The alarm sounds and the temperature display for the freezer section
flashes.
The freezer door has been opened
too frequently.
This has caused the temperature in the
freezer to rise above the set temperature.
Once the temperature has dropped to the
correct level again the alarm will stop and
the display will stop flashing.
A large amount of food is being
frozen at the same time.
Bars light up or flash in the temperature displays.
Only temperatures within the range of the appliance can be shown in the
display. Check the display again about 6 hours after turning it on.
A fault code of "F0"to"F5" appears in one of the temperature displays.
A fault has occurred. Contact Miele Technical Service.
The Super indicator light for the freezer section and the temperature display
are both flashing.
A fault has occurred. Contact Miele Technical Service.
The Super indicator light for the freezer section is not on, but the
refrigerator is running.
The indicator light is faulty. Contact Miele Technical Service.
"nA" appears in the temperature display for the freezer section.
The temperature in the freezer
section has risen too high at some
point during the last few days
because of a power failure.
^
Press the alarm off button while "nA"islit
in the display.
The display will show the warmest
temperature reached in the freezer during
the power failure for about 1 minute. The
display will then revert to the current
temperature in the freezer section.
After the power failure the appliance will
continue running at the last temperature set,
there is no need to re-set.
Frequently asked questions
29