Filter
Top Products
Securing the appliance door to the
custom door panel
^ Secure the fixing bracket using the
pre-drilled holes a using the (4 x
14 mm) screws b.
Ensure that the two metal edges are
flush (symbol //).
– Align depth Z on the custom door:
Loosen the screws at the top of the
appliance doors c and the bottom of
the fixing bracket d. Adjust the
custom door to create a space of
1/16" (2 mm) between the custom
door and the front edge of the niche.
^ Close both the doors and align them
with the adjacent cabinetry doors.
^ While holding the adjusting bolts g
with a screwdriver, tighten the nuts e
on the appliance doors using a
wrench f.
^
The cover strip h must not protrude,
it must be completely inside in the
niche.
^
Re-tighten all the screws.
^
Secure the appliance again at the
bottom with a screw i through the
round hole in the plastic bracket j.
^
Close the plastic bracket.
Installing the appliance
49