Filter
Top Products
^ Screw the screw c through the fixing
bracket d.
^ Push the bracket towards the niche
wall and tighten the screws e.
^
Close the bracket f.
^
Close the appliance doors.
Mounting the custom door
panels
^ Set a gap of 5/16" (8 mm) between
the appliance door and the fixing
bracket a.
^ Slide the mounting aids b to the
height of the custom door: The lower
edge X of the mounting aids must be
at the same height as the upper edge
of the custom door to be mounted
(see - in the illustration).
^
Unscrew the nuts c, remove the
fixing bracket d and the mounting
aids.
Installing the appliance
47