Filter
Top Products
This space must also be taken into
account with cabinetry that has a
receding base, even if it means that the
plastic bracket d will project beyond
the base of the cabinetry.
^
If the cabinetry has door stops (i.e. to
protect from slamming): pull the
appliance forward by distance h so
that a space of 1 5/8" (42 mm) is
created.
The hinges now project by distance h
and the plastic bracket d lines up with
the front edge of the hinge.
If the required distance of 1 5/8"
(42 mm), from the body of the
appliance to the front side of the
cabinetry side wall, is not observed,
the appliance door may not close
properly, causing malfunctions.
Attaching the appliance to the
installation niche
^ Push the hinged side of the
appliance to the niche wall.
^
Screw the long screws a
(4 x 19 mm) into all of the hinge
plates.
^
Open the plastic bracket and screw a
long screw b (4 x 19 mm) through
the middle of the long hole.
^
Close the plastic bracket.
Installing the appliance
46