Filter
Top Products
End of program
The program has finished when
O Finished or AutoOpen appears in
the display and the door is slightly ajar
(if applicable).
If Extra drying was selected and
AutoOpen is active, the drying fan
will run for a few minutes after the
program has ended.
^
Open the door all the way to reset the
door latch.
You can now unload the commercial
dishwasher.
,
If automatic door opening is
switched off (see "Settings menu -
AutoOpen) and you want to open
the door after the program has
ended, open the door all the way.
This helps to prevent steam damage
to the countertop because the fan
stopped running.
Turning the commercial
dishwasher off
At the end of a program:
^
Turn the commercial dishwasher off
with the - button.
The commercial dishwasher will
continue to use electricity until it is
turned off with the - button.
The water tap should be turned off if the
commercial dishwasher is not going to
be used for a longer period of time,
e. g. during vacation.
Unloading the commercial
dishwasher
Dishes tend to break and chip more
easily when they are hot.
Leave the dishes in the commercial
dishwasher until they are cool enough
to handle before unloading them.
The dishes will cool much faster if you
open the door fully when the program
has ended.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
Operating the commercial dishwasher
40