Filter
Top Products
Problem Possible fault Solution
The detergent dispenser
cover will not close.
Detergent residue is
blocking the latch.
Remove the detergent
residue.
The inside of the door
and/or the interior walls
are wet after a program
has finished.
This is normal! None.
The moisture evaporates
after some time.
There is water in the
wash cabinet at the end
of a program.
Before fixing the fault:
–
Press the - button to
turn the commercial
dishwasher off.
The filter combination in
the wash cabinet is
clogged.
Clean the filter
combination (see
Cleaning and care).
The drain pump or
non-return valve is
blocked.
Clean the drain pump or
the non-return valve (see
Maintenance).
There is a kink in the drain
hose.
Remove the kink.
Some programs run for
a long time.
No fault!
Certain programs have a
long runtime.
Select a different program
(see Program guide).
Although AutoOpen is
selected, the door
remains closed at the
end of the ProSpeed
program and the
dishware is still moist.
No fault!
Because of the
program's short runtime,
the AutoOpen function is
not available for the
ProSpeed program.
To improve the drying,
raise the rinse
temperature (see Setting
menu - High temp rinse).
Frequently asked questions
54