Filter
Top Products
Extra drying
For better drying results and to reduce
the amount of steam that escapes when
the door is opened, the Extra drying
function extends the fan runtime at the
end of the program.
This function is not available for all
programs (see Program guide).
When Extra drying is selected, the total
program runtime will increase by
approx. 20-30 minutes, depending on
the program.
^
Press the - button to turn the
commercial dishwasher on.
The Start/Stop indicator light flashes.
^ Select the desired program.
^ Press the G+ button.
G+ lights up if this function is available
for the selected program. Otherwise
Not possible is displayed.
^ Press the Start/Stop button to start
the program.
Delay start
The start time of a program can be
delayed, for instance to take advantage
of cheaper electricity rates at night. You
can delay the start time by 30 minutes
to 24 hours. The delay is set in 30
minute increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry if necessary.
Otherwise the detergent could
clump and not rinse out completely.
^ Press the - button to turn the
commercial dishwasher on.
The Start/Stop indicator light flashes.
^ Select the desired program (see
Operating the commercial
dishwasher - Selecting a program).
^ Press the , button.
The last Delay start time will appear in
the display. The Delay start indicator
light comes on.
^
Set the desired Delay start time using
the , button.
If you keep the button pressed, the time
will increase automatically to
24:00 h.
To start at 30 minutes again, press the
, button twice.
Additional functions
42