Filter
Top Products
6
MD-44 Direction Field Conversion (continued)
MD-44 Direction Field Conversion
10. R-L to L-R Conversion ONLY
Rotate the drain piping assembly removed in Step 8 180° and install it on the opposite
end of the machine. The easiest way to insert the piping is from the rear of the machine.
Install drain basket and the elbow. Screw the nipple into the elbow and connect the hoses
to the drain piping and the drain trunk. See the illustration below.
10A. Loosen the union directly above the cross fitting and rotate piping so it aligns with
the booster outlet.
10B. Rotate the Street Elbow counterclockwise 90°. Screw a Street Elbow (supplied by others)
into the existing elbow and install the existing compression fitting into the elbow.
11. Using the L-shaped 3/4" copper tubing saved in Step 3, cut a 46-1/2" piece of tubing
and connect it between points 10A and 10B.
10
10A
10B
10B