Filter
Top Products
22
Installation
Installing the Pawl Bar
Crosshead
Brass Crosshead
Roller
Guide Roller
Pawl Bar
1. Position the pawl bar on the guide rollers located at each end of the machine.
2. Lower the pawl bar so the crosshead fits on top of the brass crosshead roller.
3. The crosshead roller must fit inside the crosshead without binding.
4. Check the alignment of the pawl bar making sure that it rests evenly within the guide rollers.
The pawl bar assembly is installed in the center of the dishwasher and moves the dish racks through
the machine. To install the pawl bar: