Filter
Top Products
PROPER CARE AND
CLEANING
OF
THE BREADMAKER BY MR. COFFEE
l
Unplug the power cord and allow the breadmaker
TO
cool completely,
Caution: Do not pour water into the inner case or submerge the breadmaker
in
water.
l
Use only a mild detergent
tO
clean the breadmaker. To avoid damaging the
smooth surfaces of the breadmaker and inner
pot,
do not use chemical liquid
cleaners (such as benzene or thinners), nonabrasive or abrasive cleansers, or
scrubbing brushes or pads to clean the breadmaker or inner pot surfaces.
The Unit
Body,
Lid and Inner Case
l
Wipe the outside of the
unit
body and the lid with a damp cloth.
l
Remove any flour, bread crumbs or other
materials
from the inside of the inner
case using a damp sponge or cloth or a
small
portable vacuum cleaner.
The inner
Pot
and
Kneader Blade
l
Both the inner pot and the kneader blade are coated with a nonstick surface.
Do not use any cleaners or utensils that could scratch this
surface.
.
The nonstick surface may change in appearance after continued used.
This is
caused by moisture and steam and has no effect on its use or quality.
.
l
Remove the inner pot with kneader blade from the inner case and
wash
with
a
damp sponge or dishcloth, making sure the kneader blade mounting shaft is also
very clean. The inner pot interior can be washed with soapy waler, but do not
submerge inner
pot
in water. Wash after each use and dry thoroughly.
l
Do not soak either part in water or wash in a dishwasher.
,
l
If
it
is
difficult to remove the kneader blade from the inner pot, fill the inner pot
with warm water and let
it
stand a few minutes
IO
allow any baked-on bread
dough
to
soften.
l
If
the
hole
in
the kneader blade becomes clogged, clean It out with a soft bristle
brush or wooden or plastic toothpicks.
Before
Storing the tlreadmaker
l
Make sure the breadmaker base has cooled completely and all parts
have
been
thoroughly cleaned and dried.
l
Leave th
e lid open until the breadmaker is completely cool. This will avoid the
furmation of any moisture in the inner case.