Mr. Coffee BMR 200 Bread Maker User Manual


 
BEFORE
YOUR
FIRST USE
Carefully unpack the
breadmaker
and remove all packaging
materials.
To remove
any dust
that
may have accumulated during packaging, wipe the inner pot,
kneader
blade and the
outside
of the breadmaker with a clean,
damp
cloth.
Do not use
harsh or
abrasive
cleaners on
any part
of the
breadmaker.
Warning: Do
not
immerse the cord,
plug,
inner pot or base in water or other
liquid.
Place
the
breadmaker on a dry,
stable
surface away
from
burners
and
away ‘from
areas where cooking
grease
or
water may
splatter onto it.
Plug
the breadmaker info a
120
volt 60 Hz AC only outlet.
IMPORTANT SAFETY TIPS FROM MR. COFFEE”’
l Keep the breadmaker out
of
the
reach of infants and children, especially while it
is hot
if
any pads are
accidentally
touched,
the
operation may stop.
l
Be careful to keep your lace and hands away from the breadmaker.
l
Place the breadmaker at least
2
inches away from
any
wall
for
proper cooling.
l Do not
cover
the
breadmaker
with towels or any
other
material because steam
would not be able
to escape. This could cause the lid to warp or change
color.
l Do
not
remove the inner
pot
or insert your hand
into the
inner
pot
during
operation.
If you need to remove the inner
pot
before operation is
complete,
first
press The STOP pad to
stop
operation of the breadmaker.
l Remove any flour, bread crumbs or other materials from
the
inside of the inner
case using a damp
sponge
or
cloth.
;
Do not put a
larger quantity
of ingredients into
the
inner pot
than
recommended.
If
you
do
so,
the
bread
may not mix or bake correctly and the
breadmaker may
be damaged. The maximum
amount
of flour
to
be
used
for the
BAKE
settings is
4 - 2 / 3
cups. The maximum
amount
of prepackaged
breadmaker
mix is
4
cups
t he
maximum
amount
for the DOUGH
setting
is 4
1 / 2
cups flour.
l Handle the inner pot whith care. Remove the inner
pot
by pulling
straight
up on
the handle. Do-not
turn
or shake the inner
pot
while taking it out. If the inner
pot
is damaged or bent, the
temperature
sensor
won't
work properly. Handle
hot
inner pot using pot
holders
or oven mitts.
l Do
not
use metal scouring pads on any
part
or
parts
of the breadmaker as this
this
will
damage the finishes.