Filter
Top Products
Chapter 2 Measurement & Automation Explorer (Windows)
NI-488.2 User Manual 2-2 ni.com
Starting Measurement & Automation Explorer
To start Measurement & Automation Explorer, select Start»Programs»
National Instruments»Measurement & Automation. Figure 2-1 shows
Measurement & Automation Explorer.
Note When starting Measurement & Automation Explorer in Windows Vista, you must
choose to run as Adminstrator to allow changes to GPIB Interface Settings. To do this,
right-click on the Measurement & Automation Explorer icon and select Run as
Administrator.
Figure 2-1. Measurement & Automation Explorer